PRODUCTS UF Membranes
MARTIN Hollow Fiber UF Membrane MTUF-PVDF Serial
Application
• Municipal water treatment
• Pretreatment and post-treatment of RO systems
• FOOD and beverage processing water treatment
• Concentration treatment of food, zymolysis and milk
• Pharmaceutical water purification
• Deep treatments of wastewater for recycle
• Wastewater and Sewage
Module Type | MTUF-PVDF-1060 | MTUF-PVDF-8060 | MTUF-PVDF-6060 |
Dimension(mm) | ф250×1710 | ф200×1710 | ф160×1810 |
Interface(mm) | Coupling DN50 | Coupling DN50 | Union ф50 |
Membrane Area: (㎡) | 78 | 47 | 40 |
Feed Modes | Outside-Inside Side Feed | Outside-In Top Feed | |
Shell Material | UPVC | ||
Membrane Material | PVDF | ||
Membrane Features and Reservation | Permanent hydrophilicity(Dried Store) | ||
MWCO Dalton | 200K | ||
Hollow Fiber ID/OD (mm) | 0.8/1.3 | ||
Initial Pure Water Flux: (L/㎡.h) | 300 | ||
Operating Temperature (℃) | 5～45 | ||
pH Range | 2～13 | ||
Maximum Feed Turbidity: (NTU) | 200NTU | ||
Chlorine Tolerance (ppm) | 200 Cotinuous(Max 1000 Instantaneous) | ||
Maximum Feed Pressure: (Mpa) | 0.4 | ||
Maximum TransmembranePressure: (Mpa) | 0.2 | ||
Maximum Backwash Pressure: (MPa) | 0.2 | ||
Particles>1μm Removal : | > 6log | ||
Virus Removal: | > 5log | ||
Bacterial Removal: | > 6log | ||
Permeate SDI | < 2 | ||
Permeate Turbidity: (NTU) | <0.06 | ||
Operating Modes | Direct or Cross flow＋Backwash Timing | ||
Operating Pressure:(Mpa) | <0.1 | ||
Design Permeate Flux: (L/m2.h)(25℃,0.15MPa) | 40～120 | ||
Backwash Frequency (min) | 15-60 | ||
Backwash Duration (s) | 30-60 | ||
Backwash Pressure: (Mpa) | 0.08～0.15 | ||
Chemically Enhanced Backwash Frequency (d) | 1-7 | ||
Chemically Backwash Duration (min) | 1-10 | ||
Chemical Cleaning Frequency (d) | 30-90 | ||
Chemical Cleaning Duration (min) | 30-60 | ||
Cleaning Chemicals | NaClO or H2O2(200ppm),NaOH(Ph<12),Citric Acid(Ph>2) | ||
